No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring RMON Statistics Collection

Configuring RMON Statistics Collection

Context

RMON statistics include Ethernet statistics and history statistics. The Ethernet and history statistics collections apply to different scenarios:

  • To keep on collecting traffic statistics on an Ethernet interface, configure Ethernet statistics collection. Ethernet statistics include the number of network collisions, CRC error packets, undersized (or large) data packets, broadcast packets, multicast packets, received bytes, and received packets.
  • To store the statistics on the specified interface for later retrieval, configure history statistics collection. History statistics include bandwidth usage, number of error packets, and total number of packets.

Procedure

  • Configure Ethernet statistics collection.
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run rmon-statistics enable

      RMON statistics collection is enabled on an interface.

    4. Run rmon statistics entry-number [ owner owner-name ]

      A statistics table is created and an entry is added to the table.

    5. Run commit

      The configuration is committed.

  • Configure history statistics collection.
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run rmon-statistics enable

      RMON statistics collection is enabled on an interface.

    4. Run rmon history entry-number buckets number interval sampling-interval [ owner owner-name ]

      A history control table is created and an entry is added to the table.

    5. Run commit

      The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 36365

Downloads: 123

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next