No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Basic SNMPv3 Function Configuration

Verifying the Basic SNMPv3 Function Configuration

Procedure

  • Run the display snmp-agent local-user [ username user-name ] command to view information about an SNMPv3 local user.
  • Run the display snmp-agent sys-info version command to view the SNMP version.
  • Run the display snmp-agent sys-info contact command to view the contact method of the administrator.
  • Run the display snmp-agent sys-info location command to view the location of the switch.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 37160

Downloads: 125

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next