No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the RMON Configuration

Verifying the RMON Configuration


The RMON configurations are complete.


  • Run the display rmon alarm [ entry-number ] command to view RMON alarm configurations.
  • Run the display rmon event [ entry-number ] command to view RMON event configurations.
  • Run the display rmon eventlog [ entry-number ] command to view details about RMON event logs.
  • Run the display rmon history [ interface-type interface-number ] command to view RMON history sampling records.
  • Run the display rmon statistics [ interface-type interface-number ] command to view RMON Ethernet statistics.
  • Run the display snmp-agent trap feature-name rmon all command to view the status of all traps about the RMON module.
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 37039

Downloads: 125

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next