No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
MENU
Support Documentation

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring NetStream Sampling Resources

Configuring NetStream Sampling Resources

Context

NetStream sampling can either use mirroring or snoop resources. If NetStream sampling uses mirroring resources, NetStream and port mirroring cannot be configured on the same interface. If NetStream sampling uses snoop resources, port mirroring and inbound NetStream can be configured on the same interface.

NOTE:

Only the CE6875EI and CE6870EI support NetStream sampling resource configuration.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the netstream sampler inbound resource snoop command to configure inbound NetStream sampling to use snoop resources.

    By default, inbound NetStream sampling uses mirroring resources.

    After this command has been executed, inbound NetStream sampling cannot be configured in an interface view. If inbound NetStream sampling has been configured in an interface view, first run the undo netstream sampler [ random-packets packet-interval ] inbound command to disable inbound NetStream sampling, and then use this command.

  3. Run the commit command to commit the configuration.
Translation
简体中文
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 40056

Downloads: 127

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next
Enterprise APP

Copyright © 2019 Huawei Technologies Co., Ltd. All rights reserved.