No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enabling the SNMP Extended Error Code Function

(Optional) Enabling the SNMP Extended Error Code Function


If both the NMS and managed device are Huawei products, enabling this function extends error codes and defines more scenarios. This enables users to locate and troubleshoot faults quickly and accurately.


  1. Run system-view

    The system view is displayed.

  2. Run snmp-agent extend error-code enable

    The extended error code function is enabled.

    By default, SNMP sends only standard error codes. More error codes will be sent to the NMS after the extended error code function is enabled.

  3. Run commit

    The configuration is committed.

Updated: 2020-01-07

Document ID: EDOC1100075365

Views: 48220

Downloads: 147

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next