No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Device to Communicate with an NMS Through the SNMP Proxy

Configuring a Device to Communicate with an NMS Through the SNMP Proxy

Context

The SNMP proxy can be configured on a middle-point device to manage other devices. The NMS considers the middle-point device and managed devices as an independent network element; therefore, the NMS does not need to manage too many network elements. This function reduces network management costs, improves performance of the monitoring devices, and increases service quality.

As shown in Figure 1-9, the middle-point device connects to a managed device to perform access management, configuration, and system software version management for the managed device.
Figure 1-9 Configuring the device to communicate with NMS through SNMP proxy

Pre-configuration Tasks

Before configure SNMP proxy, configure a routing protocol so that reachable routes can be created between the NMS and middle-point device, and between the middle-point device and managed device.

Configuration Procedures

The tasks in this section need to be performed in sequence.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 41690

Downloads: 129

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next