No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Delay in Sending Traps About Neighbor Information Changes

Setting the Delay in Sending Traps About Neighbor Information Changes

Context

When neighbor information changes frequently, a delay in sending traps about neighbor information changes prevents the device from sending traps to the NMS too frequently, thus suppressing topology flapping.

The configured delay applies only to the traps of changes in the number of added neighbors, deleted neighbors, neighbors that are aged out, and neighbors whose information is deleted.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run lldp trap-interval interval

    The delay in sending neighbor change traps to the NMS is set.

    The default delay in sending neighbor change traps to the NMS is 5 seconds.

  3. Run lldp mdn trap-interval interval

    The delay in sending MDN neighbor change traps to the NMS is set.

    By default, the delay for a device to send alarms about MDN neighbor information changes to the NMS is 5 seconds.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 36282

Downloads: 123

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next