No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking NQA Test Results

Checking NQA Test Results

Prerequisites

An NQA test instance has been configured and the NQA test has been completed.

NOTE:
  • The display nqa results command displays the test results of only the test instances that have been completed.
  • The display nqa results collection command displays accumulative results of all test instances. Only the jitter tests support the query of accumulative results.
  • The display nqa results collection this command displays accumulative results of all test instances. Only the jitter tests support the query of accumulative results.
  • Failed Jitter tests are not recorded in the historical records.

Procedure

  • Run the display nqa results [ collection ] [ test-instance admin-name test-name ] command to check NQA test results.
  • Run the display nqa history [ test-instance admin-name test-name ] command to check the historical records of NQA test instances.
  • Run the display nqa results [ collection ] this command to check results of an NQA test in the specified test instance view.
  • Run the display nqa history this command to check historical records of NQA tests in the specified test instance view.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 41739

Downloads: 129

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next