No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applicable Scenarios for NETCONF

Applicable Scenarios for NETCONF

NETCONF ensures security and extensibility. When the NMS is used to manage network devices, you can use NETCONF to ensure communication between the NMS and the devices.

As shown in Figure 3-8, the NMS is deployed on the NETCONF manager that functions as the SSH client. The NETCONF agent functions as the SSH server that receives connection requests from the SSH client. SSH is a security protocol at the application layer, enhancing the reliability of NETCONF. In this networking, NETCONF is used to manage the configuration of the SSH server.

Figure 3-8 Networking diagram for establishing communication between the NMS and a device using NETCONF

Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 33742

Downloads: 121

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next