No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for NQA

Licensing Requirements and Limitations for NQA

Involved Network Elements

Other network elements are not required.

Licensing Requirements

NQA is a basic feature of CE8800, CE7800, CE6800, and CE5800 series switches and is not under license control.

Version Requirements

Table 8-1 Products and minimum version supporting NQA
Product Model Minimum Version Required
CE8868EI/CE8861EI V200R005C10
CE8860EI V100R006C00
CE8850-32CQ-EI V200R002C50
CE8850-64CQ-EI V200R005C00
CE7850EI V100R003C00
CE7855EI V200R001C00
CE6810EI V100R003C00
CE6850EI V100R001C00
CE6850-48S6Q-HI V100R005C00
CE6850-48T6Q-HI/CE6850U-HI/CE6851HI V100R005C10
CE6855HI V200R001C00
CE6870-24S6CQ-EI/CE6870-48S6CQ-EI V200R001C00
CE6870-48T6CQ-EI/CE6860EI/CE6856HI/CE6880EI V200R002C50
CE6857EI V200R005C10
CE6875EI V200R003C00
CE6865EI V200R005C00
CE5810EI V100R002C00
CE5850EI V100R001C00
CE5850HI V100R003C00
CE5855EI V100R005C10
CE5880EI V200R005C10

Feature Limitations

  • Only CE8868EI, CE8861EI, CE8860EI, CE8850EI, CE7855EI, CE7850EI, CE6875EI, CE6870EI, CE6865EI, CE6860EI, CE6857EI, CE6856HI, CE6855HI, CE6851HI, CE6850HI, and CE6850U-HI support LSP Ping and LSP Trace test instances.
  • The type of a running test instance cannot be changed. If you change the type of a running NQA test instance, the test instance will fail.
  • If the number of running test instances reaches the maximum value defined by the system, the start command is invalid.

  • When NQA is associated with VRRP, static route, and policy-based routing, the NQA test instance type must be ICMP.
  • The CE6810LI does not support IPv4 or IPv6 Layer 3 forwarding. After the IPv4 or IPv6 function is enabled on an interface of the CE6810LI, the configured IPv4 or IPv6 address can only be used to manage the switch.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 33475

Downloads: 121

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next