No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring VXLAN Flexible Flow Statistics Export

Configuring VXLAN Flexible Flow Statistics Export

Pre-configuration Tasks

After VXLAN flexible flow statistics export has been configured, the NDE classifies and collects statistics about VXLAN packets based on the original Ethernet frame information in the VXLAN packets, including protocol type, ToS, source IP address, destination IP address, source port number, and destination port number.

When outbound flexible flow sampling is configured on an interface, only the outbound interface information is displayed in the flexible flow statistics. When inbound flexible flow sampling is configured on an interface, only the inbound interface information is displayed in the flexible flow statistics.

Before configuring VXLAN flexible flow statistics export, complete the following tasks:

  • Set the physical parameters of interfaces.
  • Configure link-layer attributes of each interface.

Configuration Process

Configuring a Flexible Flow Statistics Template must be performed before Enabling VXLAN Flexible Flow Statistics Collection on an Interface. The other configuration tasks are mandatory and can be performed in any sequence.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 41687

Downloads: 129

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next