No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Interface Index Length in Layer 2 NetStream Flows

Configuring the Interface Index Length in Layer 2 NetStream Flows

Context

The interface index length configured on the NDE must be the same as that configured on the NSC. Otherwise, the NSC cannot resolve the NetStream packets sent from the NDE.

The NMS obtains the interface information of exported packets according to the interface indexes in NetStream packets. Interface index formats include 16-bit and 32-bit. The NMS devices of different vendors may use different interface index formats. The interface index format used by the NDE must be the same as the interface index format used by the NMS. For example, if the NMS can parse 32-bit interface indexes, set the format of the interface indexes contained in exported NetStream packets to 32-bit.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the netstream export ethernet index-switch index-switch command to set the number of digits in the interface index contained in an exported packet carrying Layer 2 NetStream statistics.

    By default, 16-bit interface indexes are contained in the exported packets carrying Layer 2 NetStream flow statistics.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 33636

Downloads: 121

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next