No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging in to the NETCONF Agent Using the NMS

Logging in to the NETCONF Agent Using the NMS

Context

The NMS can manage devices only when the NMS has connected to corresponding NEs and can communicate with them.

Before deploying NEs, properly divide sub-networks. The physical topology must be easy for routine maintenance in addition for showing the actual network structure.

For installation and maintenance of the NMS, see the relevant installation instruction and usage guidelines.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 37174

Downloads: 125

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next