No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Number of LLDP Packets Quickly Sent by the Device to a Neighbor

(Optional) Configuring the Number of LLDP Packets Quickly Sent by the Device to a Neighbor

Context

When the device discovers a neighbor, LLDP status changes from disabled to enabled on the device, or the status of interfaces on the device changes from Down to Up, the device quickly sends a specified number of LLDP packets to the neighbor to notify it of local device information.

The device sends one LLDP packet to the neighbor per second without any delay. After sending the specified number of LLDP packets, the device sends LLDP packets to the neighbor at the interval set in the lldp transmit interval interval command.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run lldp fast-count count

    The number of LLDP packets being sent in quick succession to neighbors is configured.

    By default, the number of LLDP packets being sent in quick succession to neighbors is 4.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 37068

Downloads: 125

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next