No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Versions for Exported Packets

Configuring Versions for Exported Packets

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the netstream export vxlan inner-ip version 9 command to set the version for the exported packets carrying VXLAN flexible flow statistics.

    By default, the version for exported packets carrying VXLAN flexible flow statistics is not set.

    NOTE:

    VXLAN flexible flow statistics support only V9 exported packets.

  3. (Optional) Run the netstream export vxlan inner-ip template timeout-rate timeout-interval command to set the interval at which the template for exporting VXLAN flexible flow statistics in V9 format is refreshed.

    By default, the template is refreshed every 1 minute.

    NOTE:

    If the default template update interval (30 minutes) is used in V200R001C00 or an earlier version, the interval is automatically changed to 1 minute after the version is upgraded to V200R002C50 or later.

    If the default template update interval (1 minute) is used in V200R002C50 or a later version, the interval is automatically changed to 30 minutes after the version is downgraded to V200R001C00 or an earlier version.

  4. Run the commit command to commit the configuration.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 42255

Downloads: 129

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next