No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Type of TLVs that an Interface Can Send

(Optional) Configuring the Type of TLVs that an Interface Can Send

Context

TLVs that can be encapsulated into an LLDPDU include basic TLVs, TLVs defined by the IEEE 802.1, TLVs defined by IEEE 802.3, peer device identity TLVs, and DCBX TLVs.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run lldp tlv-enable { dot1-tlv protocol-identity | dcbx }

    Types of TLVs allowed to be advertised by LLDP are configured.

    By default, all TLVs except DCBX TLVs and Protocol Identity TLVs are allowed to be advertised by LLDP.

    NOTE:

    CE6880EI and CE5800 do not support DCBX TLVs.

    To disable LLDP on an interface from advertising any TLVs except DCBX TLVs and Protocol Identity TLVs, run the lldp tlv-disable command.

  4. Configure the interface to advertise LLDP packets carrying peer device identity TLVs.

    When the Agile Controller is used to automatically deploy network services, you can manually manage a device on the Agile Controller web UI. When multiple devices directly connected to the device go online, the Agile Controller cannot determine which configurations are to be delivered to these devices. You can configure the interfaces to advertise LLDP packets carrying peer device identity TLVs. The directly connected devices can receive the identity TLVs and notify the Agile Controller. The Agile Controller then can deliver corresponding network service configurations to the devices based on their identity TLVs.

    1. Run port identity

      A peer device identity TLV is configured.

      By default, no peer device identity TLV is configured.

    2. Run identity enable

      The LLDP packets advertised by the interface are configured to carry peer device identity TLVs.

      By default, the LLDP packets advertised by an interface do not carry peer device identity TLVs.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 40458

Downloads: 127

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next