No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring LLDP Status

Monitoring LLDP Status

Context

In routine maintenance, you can run the following commands in any view to check the LLDP status.

Procedure

  • Run the display lldp statistics [ interface interface-type interface-number ] command to view statistics about sent and received LLDP packets in the system or on an interface.
  • Run the display lldp mdn statistics [ interface interface-type interface-number ] command to check statistics about non-LLDP packets received by all interfaces or a specified interface.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 33843

Downloads: 121

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next