No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the One-Way Transmission Delay Threshold

Configuring the One-Way Transmission Delay Threshold

Context

In Jitter tests, after the one-way transmission delay threshold is configured, the test results show statistics about the test packets of which the transmission exceeds the threshold. Network administrators can analyze the operating status of the network according to the test results.

NOTE:

The one-way transmission delay threshold can be configured only when the test-type is set to jitter.

You can perform either of 3 and 4 or both of them in any sequence.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run nqa test-instance admin-name test-name

    The NQA view is displayed.

  3. Run threshold owd-sd owd-sd-value

    The one-way transmission delay threshold (from the source to the destination) is configured.

    By default, no one-way transmission delay threshold is configured.

  4. Run threshold owd-ds owd-ds-value

    The one-way transmission delay threshold (from the destination to the source) is configured.

    By default, no one-way transmission threshold is configured.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 40068

Downloads: 127

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next