No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Network Management and Monitoring, including SNMP, RMON, NETCONF, OpenFlow, LLDP, NQA, Mirroring, Packet Capture, Packet Trace, Path and Connectivity Detection Configuration, NetStream, sFlow, and iPCA.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for Telemetry

Licensing Requirements and Limitations for Telemetry

Involved Network Elements

The switch needs to be used with a collector.

Licensing Requirements

The telemetry function is controlled by a license. By default, this function is disabled on a new device. To use the telemetry function, apply for and purchase the license from the device vendor.

In V200R003C00, you need to load a license and restart the device before you can configure the telemetry function. In V200R005C00 and later versions, you can load a license and then configure the telemetry function without restarting the device.

Version Requirements

Table 18-7 Products and minimum version supporting Telemetry


Minimum Version Required

CE5880EI V200R005C10
CE6810EI V200R003C00
CE6810LI V200R003C00
CE6850EI V200R003C00
CE6850HI V200R003C00
CE6850U-HI V200R003C00
CE6851HI V200R003C00
CE6855HI V200R003C00
CE6856HI V200R003C00
CE6857EI V200R005C10
CE6860EI V200R003C00
CE6865EI V200R005C00
CE6870EI V200R003C00
CE6875EI V200R003C00
CE6880EI V200R003C00
CE7850EI V200R003C00
CE7855EI V200R003C00
CE8850-32CQ-EI V200R002C50
CE8850-64CQ-EI V200R005C00
CE8860EI V200R003C00
CE8861EI V200R005C10
CE8868EI V200R005C10

Feature Limitations

  • The switch supports Telemetry for only physical interfaces and their queues.
  • The switch can send monitoring data to the target collector with the IPv4 address only.
Updated: 2019-04-20

Document ID: EDOC1100075365

Views: 35275

Downloads: 123

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next