No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, EFM Configuration, and CFM Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the VRRP Version Number

(Optional) Configuring the VRRP Version Number

Context

IPv4 VRRP supports VRRPv2 and VRRPv3. If devices in a VRRP group use different VRRP versions, VRRP Advertisement packets will fail to be forwarded.
  • A VRRPv2 group can send and receive only VRRPv2 Advertisement packets, and discards received VRRPv3 Advertisement packets.

  • A VRRPv3 group can send and receive both VRRPv2 and VRRPv3 Advertisement packets. The VRRPv3 group can communicate with both VRRPv2 and VRRPv3 groups.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run vrrp version { 2 | 3 }

    The VRRP version number is set.

    By default, VRRPv2 is used.

    If VRRPv3 is used, run either of the following commands as required:

    • To configure the device to send VRRP Advertisement packets of a specified version, run the vrrp compatible-version { 2 | 3 | all } command in the system view.
    • To configure the device's interface to send VRRP Advertisement packets of a specified version, run the vrrp vrid virtual-router-id compatible-version { 2 | 3 | all } command in the view of the interface on which the VRRP group is configured.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075366

Views: 18998

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next