No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Configuration Guide - Virtualization
CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of virtualization, including stack and SVF.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Stack Priority

Stack Priority

The stack priority of a stack member determines its role in role election. A larger value indicates a higher priority and higher probability that the stack member is elected as the master switch.

During the stack master election, the switch operating status is compared first and then the stack priority. If two switches run in the same state, the switch with a higher stack priority is elected as the master switch. Therefore, you are advised to set the highest stack priority for the switch that is expected to be the stack master.

Updated: 2020-03-17

Document ID: EDOC1100075367

Views: 15315

Downloads: 103

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next