No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Virtualization

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of virtualization, including stack and SVF.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Stack Domain ID

Configuring a Stack Domain ID


After switches are connected using stack links and set up a stack, they form a stack domain. Multiple stacks can be deployed on a network to support various applications. These stacks are identified by their domain IDs.

Member switches in a stack must be configured with the same domain ID. Otherwise, they cannot set up a stack.


  1. Run the system-view command to enter the system view.
  2. Run the stack command to enter the stack management view.
  3. Run the stack member { member-id | all } domain domain-id command to configure a stack domain ID.

    By default, a switch has no stack domain ID. If the switch has no stack domain ID, the configuration takes effect after you save the configuration. If you change the existing stack domain ID, the new ID takes effect after the switch restarts.

  4. Run the commit command to commit the configuration.
Updated: 2020-01-07

Document ID: EDOC1100075367

Views: 12567

Downloads: 80

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next