No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Virtualization

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of virtualization, including stack and SVF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Stack Priority

Configuring a Stack Priority

Context

The stack priority of a member switch determines its role in the stack. A larger value indicates a higher priority and higher probability that the member switch is elected as the master switch.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the stack command to enter the stack management view.
  3. Run the stack member { member-id | all } priority priority-value command to configure a stack priority for the switch.

    By default, the stack priority of a switch is 100. After changing the stack priority, restart the switch for the configuration to take effect.

  4. Run the commit command to commit the configuration.
Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075367

Views: 9797

Downloads: 69

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next