No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Virtualization

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of virtualization, including stack and SVF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Stack Competition Delay

Configuring the Stack Competition Delay

Context

During a stack restart, the startup time of member switches varies. If the startup time difference is large, the master, standby, and slave roles may change or some member switches restart multiple times. Assume that three switches A, B, and C set up a stack in chain topology and switch B starts slowly. After the stack restarts, switches A and C finish starting first and compete to be the master switch, whereas switch B has not finished starting. After switch B finishes starting, switches A and C perform stack competition. The switch that fails stack competition restarts again and then joins the stack.

To prevent this problem, before the stack restart, configure the stack competition delay for the switches that start quickly so that stack competition begins after the switch that starts slowly finishes starting.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the stack command to enter the stack management view.
  3. Run the stack member member-id competition-delay delay-time command to configure the stack competition delay.

    By default, the stack competition delay is 0 seconds.

  4. Run the commit command to commit the configuration.
Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075367

Views: 9619

Downloads: 69

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next