No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Virtualization

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of virtualization, including stack and SVF.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Stack Member ID

Stack Member ID

A stack member ID is used to identify and manage a stack member. Each stack member has a unique stack member ID in a stack.

Stack members are managed on a per-slot basis and identified by stack member IDs. When using commands to configure and manage stack members, you must specify their stack member IDs. For example, you can run the display device slot 2 command to view information about a stack member. In this command, 2 is the stack member ID of the switch.

In a stack, an interface number contains a stack member ID, in the stack member ID/subcard ID/port number format. For example, after a switch joins a stack, if its stack member ID is 2, 10GE interface 1 is numbered 10GE2/0/1.

Translation
Download
Updated: 2020-01-07

Document ID: EDOC1100075367

Views: 13453

Downloads: 101

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next