No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Virtualization

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of virtualization, including stack and SVF.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restarting the Switch After Saving the Configuration

Restarting the Switch After Saving the Configuration

Context

To prevent loss of stack configuration caused by power failure or restart of member switches, you are advised to save the configuration immediately after you complete the software configuration. Save the configuration such as the stack member ID and priority, and restart the switch to make the configuration take effect.

Procedure

  1. Run the save command to save the configuration.
  2. Run the reboot command to reboot the switch.
Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075367

Views: 10849

Downloads: 71

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next