No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RESTful API Reference

CloudEngine 12800 and 12800E V200R005C10

This document describes the OPS APIs supported by the device, including OPS-supported operations, request examples, elements in the requests, response examples, elements in the responses, and response status codes.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring IS-IS Interfaces

Configuring IS-IS Interfaces

Operation

URI

Description

POST

/isiscomm/isSites/isSite/isCircuits/isCircuit

Configure IS-IS interface parameters.

  • Request example
    <?xml version="1.0" encoding="UTF-8"?>
    <isiscomm>
      <isSites>
        <isSite>
          <instanceId>1</instanceId>
          <isCircuits>
            <isCircuit operation="merge">
              <ifName>10GE1/0/1</ifName>
              <ipv4Enable>true</ipv4Enable>
              <ipv6Enable>true</ipv6Enable>
              <circuitLevelType>level_1</circuitLevelType>
              <typeP2pEnable>true</typeP2pEnable>
              <level1Cost>1000</level1Cost>
              <peerHoldMaxCostTimer>540000</peerHoldMaxCostTimer>
            </isCircuit>
          </isCircuits>
        </isSite>
      </isSites>
    </isiscomm>

    Table 28-29 describes elements in requests.

    Table 28-29 Elements

    Element

    Description

    instanceId

    Specifies an IS-IS process ID. An IS-IS process must be created before you configure IS-IS parameters on an interface. This element is mandatory.

    ifName

    Specifies an interface name. This element is mandatory.

    ipv4Enable

    Specifies whether to enable IS-IS IPv4 on the interface. Either IS-IS IPv4 or IS-IS IPv6 must be enabled when you create an interface. If you modify the interface, you need to leave either IS-IS IPv4 or IS-IS IPv6 enabled on the interface. This element is optional.

    The value is a Boolean data type.
    • true: Enables IS-IS IPv4 on the interface.
    • false: Disables IS-IS IPv4 on the interface.

    ipv6Enable

    Specifies whether to enable IS-IS IPv6 on the interface. To enable IS-IS IPv6, enable IPv6 in the IS-IS process and global IPv6 on the interface first. Either IS-IS IPv4 or IS-IS IPv6 must be enabled when you create an interface. If you modify the interface, you need to leave either IS-IS IPv4 or IS-IS IPv6 enabled on the interface. This element is optional.

    The value is a Boolean data type.
    • true: Enables IS-IS IPv6 on the interface.
    • false: Disables IS-IS IPv6 on the interface.

    The default value is false.

    circuitLevelType

    Specifies an interface level. This element is optional.

    The value is an enumerated type and case-sensitive. The value can be:
    • level_1: Sets the level to Level-1.
    • level_2: Sets the level to Level-2.
    • level_1_2: Sets the level to Level-1-2.

    The default value is level_1_2.

    typeP2pEnable

    Specifies whether to simulate the network type of the interface as P2P. This element takes effect only on broadcast interfaces. This element is optional.

    The value is a Boolean data type.
    • true: Simulates the network type of the interface as P2P.
    • false: Does not simulate the network type of the interface as P2P.

    The default value is false.

    level1Cost

    Specifies the link cost for level-1 SPF calculation on the interface. If the IS-IS cost type is narrow, narrow-compatible, or compatible, the value range is 1–63. If the IS-IS cost type is wide or wide-compatible, the value range is 1–16777215. If the interface is a loopback interface, the value can be 0. This element is optional.

    level2Cost

    Specifies the link cost for level-2 SPF calculation on the interface. If the IS-IS cost type is narrow, narrow-compatible, or compatible, the value range is 1–63. If the IS-IS cost type is wide or wide-compatible, the value range is 1–16777215. If the interface is a loopback interface, the value can be 0. This element is optional.

    peerHoldMaxCostTimer

    Specifies a period during which OSPF keeps the maximum cost in local LSAs. The value is in milliseconds. This element is optional.

  • Response example (XML format)
    <?xml version="1.0" encoding="UTF-8"?> 
        <ok/>

    Table 28-30 describes status codes in responses.

    Table 28-30 Status codes

    Status Code

    Description

    200 OK

    The operation succeeded.

    400 Bad Request

    The request operation failed because the request is incorrect in syntax or the information attribute in the request is incorrect.

    500 Internal Server Error

    The request operation failed because of internal errors in services or unidentified processing errors.

Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075372

Views: 10707

Downloads: 16

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next