No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RESTful API Reference

CloudEngine 12800 and 12800E V200R005C10

This document describes the OPS APIs supported by the device, including OPS-supported operations, request examples, elements in the requests, response examples, elements in the responses, and response status codes.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Multi-Topology on an IS-IS Interface

Configuring Multi-Topology on an IS-IS Interface

Operation

URI

Description

POST

/isiscomm/isSites/isSite/isSiteMTs/isSiteMT/isCircMts/isCircMt

Configure multi-topology parameters on an IS-IS interface.

  • Request example
    Example 1: isis suppress-reachability level-1
    
    <?xml version="1.0" encoding="UTF-8"?>
    <isiscomm>
      <isSites>
        <isSite>
          <instanceId>1</instanceId>
          <isSiteMTs>
            <isSiteMT>
            <addressFamily>afIpv4</addressFamily>
            <mtId>0</mtId>
            <isCircMts>
              <isCircMt operation="merge">
                <ifName>10GE1/0/1</ifName>
                <suppressReach>level_1</suppressReach>
              </isCircMt>
            </isCircMts>
            </isSiteMT>
          </isSiteMTs>
        </isSite>
      </isSites>
    </isiscomm>
    
    Example 2: isis ipv6 cost 1000 level-1
    <?xml version="1.0" encoding="UTF-8"?>
    <isiscomm>
      <isSites>
        <isSite>
          <instanceId>1</instanceId>
          <isSiteMTs>
            <isSiteMT>
            <addressFamily>afIpv6</addressFamily>
            <mtId>2</mtId>
            <isCircMts>
              <isCircMt operation="merge">
                <ifName>10GE1/0/1</ifName>
                <level1Cost>1000</level1Cost>
              </isCircMt>
            </isCircMts>
            </isSiteMT>
          </isSiteMTs>
        </isSite>
      </isSites>
    </isiscomm>
    

    Table 28-31 describes elements in requests.

    Table 28-31 Elements

    Element

    Description

    instanceId

    Specifies an IS-IS process ID. An IS-IS process must be created before you configure IS-IS parameters on an interface. This element is mandatory.

    addressFamily

    Specifies a multi-topology address family type: IPv4 or IPv6 address family. This element is mandatory.

    The value is an enumerated type and case-sensitive. The value can be:
    • afIpv4: Indicates the IPv4 address family.
    • afIpv6: Indicates the IPv6 address family.

    The default value is afIpv4.

    mtId

    Specifies an IS-IS multi-topology ID. This element is mandatory.

    The value is an integer ranging from 0 to 4095. The default value is 0.

    Currently, only 0 and 2 are supported.

    ifName

    Specifies an interface name. This element is mandatory.

    level1Cost

    Specifies the link cost for level-1 SPF calculation on the interface. If the IS-IS cost type is narrow, narrow-compatible, or compatible, the value range is 1–63. If the IS-IS cost type is wide or wide-compatible, the value range is 1–16777215. If the interface is a loopback interface, the value can be 0. This element is optional.

    level2Cost

    Specifies the link cost for level-2 SPF calculation on the interface. If the IS-IS cost type is narrow, narrow-compatible, or compatible, the value range is 1–63. If the IS-IS cost type is wide or wide-compatible, the value range is 1–16777215. If the interface is a loopback interface, the value can be 0. This element is optional.

    suppressReach

    Enables suppression of direct route advertisement. By default, suppression of direct route advertisement is disabled. This element is optional.

    The value is an enumerated type and case-sensitive. The value can be:
    • no_set: The advertisement of direct routes is not suppressed.
    • level_1: Suppresses the advertisement of only the direct routes to Level-1 interface addresses.
    • level_2: Suppresses the advertisement of only the direct routes to Level-2 interface addresses.
    • level_1_2: Suppresses the advertisement of the direct routes to Level-1 and Level-2 interfaces.

    The default value is no_set.

  • Response example (XML format)
    <?xml version="1.0" encoding="UTF-8"?> 
        <ok/>

    Table 28-32 describes status codes in responses.

    Table 28-32 Status codes

    Status Code

    Description

    200 OK

    The operation succeeded.

    400 Bad Request

    The request operation failed because the request is incorrect in syntax or the information attribute in the request is incorrect.

    500 Internal Server Error

    The request operation failed because of internal errors in services or unidentified processing errors.

Translation
Download
Updated: 2019-04-03

Document ID: EDOC1100075372

Views: 10550

Downloads: 16

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next