No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


RESTful API Reference

CloudEngine 12800 and 12800E V200R005C10

This document describes the OPS APIs supported by the device, including OPS-supported operations, request examples, elements in the requests, response examples, elements in the responses, and response status codes.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configure the SNMP Blacklist Feature

Configure the SNMP Blacklist Feature






Configure the SNMP blacklist feature.

  • Request example
    <?xml version="1.0" encoding="UTF-8"?>

    Table 16-16 describes elements in requests.

    Table 16-16 Elements




    Specifies whether to enable the blacklist function for IP addresses.


    Specifies whether to enable the blacklist function for users.


    Specifies the maximum number of consecutive authentication failures allowed for an SNMPv3 user.


    Specifies a period after which a user is locked due to consecutive login failures.


    Specifies the locking period of an SNMPv3 user if the number of the user's authentication failures exceeds a specified value. By default, an SNMPv3 user is locked for 5 minutes.

  • Response example (XML format)
    <?xml version="1.0" encoding="UTF-8"?>

    Table 16-17 describes status codes in responses.

    Table 16-17 Status codes

    Status Code


    200 OK

    The operation succeeded.

    400 Bad Request

    The request operation failed because the request is incorrect in syntax or the information attribute in the request is incorrect.

    500 Internal Server Error

    The request operation failed because of internal errors in services or unidentified processing errors.

Updated: 2019-04-03

Document ID: EDOC1100075372

Views: 12517

Downloads: 18

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next