No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


RESTful API Reference

CloudEngine 12800 and 12800E V200R005C10

This document describes the OPS APIs supported by the device, including OPS-supported operations, request examples, elements in the requests, response examples, elements in the responses, and response status codes.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the LACP Attribute of a Trunk Interface

Configuring the LACP Attribute of a Trunk Interface






Configure the LACP attribute of a trunk interface.

  • Request example
    <?xml version="1.0" encoding="UTF-8"?> 
       <TrunkIf operation="merge">

    Table 9-82 describes elements in a request.

    Table 9-82 Elements




    Indicates a trunk interface list.


    Indicates trunk interface information.


    Specifies the name of a trunk interface. The value is a string of 1 to 63 characters.


    Specifies the timeout period of an LACP protocol packet. Fast indicates the short period, while Slow indicates the long period. The default value is Slow.

    The value is an enumerated type and case-sensitive. The value can be:

    • Slow: The timeout for receiving a packet is 90 seconds, and the peer sends LACP packets every 30 seconds. The response is slow, but few resources are consumed.
    • Fast: The timeout period for receiving a packet is 3 seconds by default, and the peer sends LACP packets every second. The response is fast, but many resources are consumed.

    The default value is Slow.

  • Response example (XML format)
    <?xml version="1.0" encoding="UTF-8"?> 

    Table 9-83 describes status codes in a response.

    Table 9-83 Status codes

    Status Code


    200 OK

    The operation succeeded.

    400 Bad Request

    The request operation failed because the request is incorrect in syntax or the information attribute in the request is incorrect.

    500 Internal Server Error

    The request operation failed because of internal errors in services or unidentified processing errors.

Updated: 2019-04-03

Document ID: EDOC1100075372

Views: 10131

Downloads: 16

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next