No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


RESTful API Reference

CloudEngine 12800 and 12800E V200R005C10

This document describes the OPS APIs supported by the device, including OPS-supported operations, request examples, elements in the requests, response examples, elements in the responses, and response status codes.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configure HMAC Authentication Algorithms on an SSH Server

Configure HMAC Authentication Algorithms on an SSH Server






Configure HMAC authentication algorithms on an SSH server.

The SSH client and server negotiate authentication algorithms for the packets exchanged between them. During negotiation, the client sends its authentication algorithms to the server. After comparing the received authentication algorithms with local ones, the server selects the first matching authentication algorithm received for packet transmission. If no matching authentication algorithm is found, the negotiation fails.

  • Request example:
    <?xml version="1.0" encoding="UTF-8"?>

    Table 13-40 describes elements in requests.

    Table 13-40 Elements




    Specifies an MD5 HMAC authentication algorithm.


    Specifies an MD5_96 HMAC authentication algorithm.


    Specifies an SHA1 HMAC authentication algorithm.


    Specifies an SHA1_96 HMAC authentication algorithm.


    Specifies an SHA2_256 HMAC authentication algorithm.


    Specifies an SHA2_256_96 HMAC authentication algorithm.

  • Response example (XML format)
    <?xml version="1.0" encoding="UTF-8"?>

    Table 13-41 describes status codes in responses.

    Table 13-41 Status codes

    Status Code


    200 OK

    The operation succeeded.

    400 Bad Request

    The request operation failed because the request is incorrect in syntax or the information attribute in the request is incorrect.

    500 Internal Server Error

    The request operation failed because of internal errors in services or unidentified processing errors.

Updated: 2019-04-03

Document ID: EDOC1100075372

Views: 12904

Downloads: 18

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next