No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


RESTful API Reference

CloudEngine 12800 and 12800E V200R005C10

This document describes the OPS APIs supported by the device, including OPS-supported operations, request examples, elements in the requests, response examples, elements in the responses, and response status codes.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configure an IPv4 Address for an Interface

Configure an IPv4 Address for an Interface






Configure an IPv4 address for an interface.

  • Request example
    <?xml version="1.0" encoding="UTF-8"?>
          <interface operation="merge">
                    <am4CfgAddr operation="create">

    Table 9-34 describes elements in requests.

    Table 9-34 Elements




    Specifies an interface name.


    Specifies IPv4 configurations, including the configured IPv4 address, IPv4 address negotiation, and IPv4 address unnumbered.


    Specifies an IPv4 address list.


    Specifies an IPv4 address configuration.


    Specifies an IPv4 address. The value is a string of 0 to 255 characters in dotted decimal notation.


    Specifies the mask of an IPv4 address. The value is a string of 0 to 255 characters in dotted decimal notation.


    Specifies an IPv4 address type. The value is an enumerated type and case-sensitive:

    main: primary IP address.

    sub: secondary IP address.

    unnumber: borrowed IP address.

    The default value is main.

  • Response example (XML format)
    <?xml version="1.0" encoding="UTF-8"?> 

    Table 9-35 describes status codes in responses.

    Table 9-35 Status codes

    Status Code


    200 OK

    The operation succeeded.

    400 Bad Request

    The request operation failed because the request is incorrect in syntax or the information attribute in the request is incorrect.

    500 Internal Server Error

    The request operation failed because of internal errors in services or unidentified processing errors.

Updated: 2019-04-03

Document ID: EDOC1100075372

Views: 12949

Downloads: 18

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next