No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor BCManager 6.5.0 eReplication User Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Can I Do If the VRG Becomes Faulty

What Can I Do If the VRG Becomes Faulty

Symptom

During the system running, if an alarm indicating VRG pairing failure, VRG NE offline, DR VM disconnection, abnormal VRG replication service, or abnormal VRG cron service is displayed on eReplication, the VRG may be faulty. Follow instructions in this section to troubleshoot the fault.

Possible Causes

The VRG VM is faulty.

Fault Diagnosis

None

Procedure

  1. Identify the fault cause according to the alarm information.

    • VRG NE offline: Locate the disconnection cause. After the VRG NE status changes to online, troubleshooting is complete.
    • VRG VM link failure: Re-configure the network adapter to connect to the peer VRG. After the link is down, troubleshooting is complete.
    • Other cause: Perform 2.

  2. Check whether the alarm can help rectify the VRG fault.

    • If yes, no further action is required.
    • If no, go to 3.

  3. Log in to FusionCompute at the production site. For details, see section Logging In to the FusionCompute of the FusionCompute V100R005Cxx Software Installation Guide.
  4. Select VM and Template.

    The VM and Template page is displayed.

  5. Select the faulty VRG VM, and choose Operation > Stop.

    Stop the VRG VM as prompted. When the VM status changes to Stopped, the VM is stopped.

  6. Log in toeReplication, and click Resources.
  7. In the navigation tree on the left, choose xxSite > FusionSphere, where xxSite is the center where the faulty VRG resides.
  8. Select the faulty VRG, select the VRG VM in the Protected VM area, click Move, and select Force Remove.

    Migrate the VM from the VRG to a normal one.

  9. Select a normal VRG from the VRG list to support the VM, click Start, and select Consistency verification to enable DR.
Translation
Download
Updated: 2019-05-21

Document ID: EDOC1100075861

Views: 10337

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next