No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor BCManager 6.5.0 eReplication User Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a System Administrator

Creating a System Administrator

If you want to implement rights- and domain-based management of the NMS, you can create an administrator, and then set the administrator's owning administrator group, managed network elements, and NMS login IP address segment.

Prerequisites

Before creating an administrator, if you want to assign specific permissions set to the administrator, create an administrator group first.

Procedure

  1. On the menu bar, select Settings.
  2. In the navigation tree, choose System Administrator > Administrator.
  3. In the function pane, click Create.
  4. Configure basic information for the administrator. Table 3-5 describes related parameters.

    Table 3-5  Administrator parameters

    Parameter

    Description

    Value

    Username

    Username for logging in to the NMS. After an administrator is created, its username cannot be changed.

    [Value range]

    The name contains 1 to 64 characters, including letters, digits, underscores (_), and hyphens (-), and can start only with a letter or underscore (_).

    [Example]

    user01

    Password

    Password for logging in to the NMS when password authentication is enabled. The password must meet the following requirements:

    • Contains 8 to 64 characters.
    • Must contain special characters, including !\"#$%&\'()*+,-./:;<=>?@[\\]^`{_|}~ and spaces.
    • Must contain upper-case letters, lower-case letters, and digits.
    • Cannot be the same as the username or mirror writing of the username.

    For details about the password policy, see Configuring a Security Policy for Administrators.

    [Example]

    A23!@23a

    Confirm Password

    Confirm password. The password and confirm password must be the same.

    The parameter value must be the same as that of Password.

    [Example]

    A23!@23a

    Description

    Brief description about the administrator, helping identify the administrator.

    [Value range]

    Contains 0 to 100 characters.

    [Example]

    Resource management

    Max. Number of User Connections

    After this parameter is enabled, the system limits the maximum number of concurrent sessions. After the threshold is exceeded, no more user can log in to eReplication.
    NOTE:
    Max. Number of User Connections is invalid for administrators belonging to the NBIRole administrator group.

    [Value range]

    The value ranges from 1 to 8. If the parameter is not enabled, there is no limit on the number of user connections.

  5. Click the Administrator Group tab to select an administrator group for the administrator. Then the administrator can inherit the permissions of the administrator group.

    If you select multiple administrator groups, the administrator has the permissions of all selected administrator groups.

  6. Optional: Click the Resources tab to assign the administrator resources for management.

    In the resource list, select desired resources to be managed by the administrator.

  7. Optional: Click the Login Network Segment tab and select an IP address segment for the administrator to log in to the NMS.

    Perform the following operations to set an IP address segment.

    NOTE:

    The first field of the IP address is an integer from 1 to 223 (excluding 127), the last field is an integer from 1 to 255, and the other two fields are integers from 0 to 255.

    • Create an IP address segment.
      1. Click Add.

        The Add Login Network Segment dialog box is displayed.

      2. Fill in Start IP Address, End IP Address, and Description.
      3. Click OK.
    • Modify an IP address segment.
      1. Select an IP address segment and click Modify on the Operation list.

        The Edit Login Network Segment dialog box is displayed.

      2. Fill in Start IP Address, End IP Address, and Description.
      3. Click OK.
    • Delete an IP address segment.
      1. Select an IP address segment and click More > Delete on the Operation list.

        In the Warning dialog box that is displayed, read the content of the dialog box carefully and select I have read and understood the consequences associated with performing this operation.

      2. Click OK.

  8. Optional: Click the Service Object tab to assign the administrator service objects for management.

    Only selected service objects are displayed.

  9. Click OK.
Translation
Download
Updated: 2019-05-21

Document ID: EDOC1100075861

Views: 10630

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next