No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor BCManager 6.5.0 eReplication User Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
High-Risk Operations

High-Risk Operations

This section introduces the eReplication high-risk operations.

During O&M, you need to strictly follow the instructions when performing operations listed in Table 7-32. Otherwise, potential risks may be posed to running devices.

Table 7-32  eReplication high-risk operations



On a eReplication node, modify the operating system time.

Scheduled tasks are executed at inaccurate points in time.

In HA deployment scenarios, perform switchover of eReplication nodes.

The eReplication services interrupt during the switchover and will be restored after the switchover.

Stop eReplication.

eReplication cannot be accessed.

Uninstall eReplication.

eReplication cannot be accessed.

On a eReplication node, modify the permissions on the eReplication save directory.

eReplication may malfunction, which will result in eReplication unavailable.

On a eReplication node, replace a certificate.

A certificate replacement error may cause a service interruption.

On a eReplication node, modify the IP address of the operating system.

If the listening IP address of eReplication is modified, eReplication may become unavailable.

On a eReplication node, modify file /etc/hosts of the operating system.

eReplication may fail to be started.

On a eReplication node, modify user root's crontab rule.

The operating system may be restarted, after which eReplication cannot be started.

Updated: 2019-05-21

Document ID: EDOC1100075861

Views: 13996

Downloads: 68

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next