No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor BCManager 6.5.0 eReplication User Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Recovery Plan

Creating a Recovery Plan

On eReplication, you can create a recovery plan based on the protected groups that you have created, implement one-click disaster recovery testing, fault recovery, and scheduled migration based on the recovery plan, and start applications on a specified host in the DR center.

Prerequisites

  • Protected groups have been created and are not used in any recovery plan.
  • Protected groups to be enabled are not in the Invalid state.

Context

If the eReplication Agent is re-installed on the host after uninstalled, you must create a recovery plan for protected groups on the host again.

Procedure

  1. On the menu bar, select Utilization > Data Recovery.
  2. Click Create.

    The Create Recovery Plan page is displayed.

  3. Set Name and Description of the protected group. Table 5-75 describes related parameters.

    Table 5-75  Recovery plan parameters

    Parameter

    Description

    Value

    Name

    Name of a recovery plan to be created.

    [Value range]

    • Contains 4 to 32 characters.
    • Contains letters, digits, underscores (_), and hyphens (-), and cannot start with a hyphen (-).

    [Example]

    plan

    Description

    Description of the recovery plan.

    [Value range]

    Contains 0 to 255 characters.

    [Example]

    Recovery plan

  4. Click OK.
Translation
Download
Updated: 2019-05-21

Document ID: EDOC1100075861

Views: 18467

Downloads: 76

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next