No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor BCManager 6.5.0 eReplication User Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an Interconnection-Purpose Account (Normal Mode)

Creating an Interconnection-Purpose Account (Normal Mode)

This operation creates an account for interconnection between eReplication and FusionCompute.

Prerequisites

The system administrator has User Management and Role Management rights.

Procedure

  1. Log in to the FusionCompute management interface.
  2. On FusionCompute, choose System Management > Rights Management.

    The Rights Management page is displayed.

  3. Choose User > Add User.

  4. Specify User Type.

    Select Interface interconnection user.

    • Domain user: logs in to the system using the domain user name and password.
    • Local user: logs in to the system using the local user name and password.
    • Interface interconnection user: an internal account used for interconnection between FusionCompute and other components.

  5. Select a user role in the Subrole list box.

    Select the desired Subrole according to the created administrator type and operation permissions. In this task, select administrator.

  6. Ser user parameters.

    Table 9-2 describes the user parameters.

    Table 9-2  User parameters

    User parameters

    Description

    Username

    The domain user name must be consistent with that created on the domain server and its length must not exceed 255 characters. The local user name and the interface interconnection user name must contain only letters, digits, underscores, and hyphens, start with a letter, and have a length of 1 to 20 characters.

    Password

    As specified in the default password policy, a password must contain any two of the following three character types: upper-case letter, lower-case letter, and digit; a password must contain at least one of the special characters: at least one special character (`~!@#$%^&*()-_=+\|[{}];:'",<.>/?; the default password length is 8 to 32 characters. This parameter does not need to be specified for a domain user. All modifications to the password must comply with the current password policy.

    Maxi concurrent logins

    Specifies the maximum number of users who can use the specific user name to log in to the system.

    Mobile

    Its value must consist of digits with a maximum of 25 characters.

    Email

    Its value must be a valid email address, to which any newly-generated alarm will be sent for informing the administrator.

    Description

    User description

  7. Click OK.

    A message box is displayed.

  8. Click OK.

    The user creation is completed.

Translation
Download
Updated: 2019-05-21

Document ID: EDOC1100075861

Views: 10857

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next