No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor BCManager 6.5.0 eReplication User Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Stopping the eReplication Server

Stopping the eReplication Server


This operation stops the eReplication Server. You can no longer use eReplication to manage disaster recovery after the eReplication Server is stopped. Stop the eReplication Server only for fault diagnosis.


  • Windows: shutdownSystem.bat
  • Linux:



Usage Guidelines

  • Windows
    1. Log in to the eReplication Server as an administrator.
    2. Go to the installation path\bin directory of the eReplication Server.

      In Windows, the default installation path of the eReplication Server is C:\BCManager\Runtime. The installation path is user-definable. You are advised not to install the eReplication Server on a system disk.

    3. Double-click the shutdownSystem.bat file.
    4. Type y and press Enter.
  • Linux
    1. Use PuTTY to log in to the eReplication Server management server.
      • In template-based installation mode: Log in as user DRManager, and run the su root command to switch to user root.
      • In software package-based installation mode: Log in as user root.
      The default password of user DRManager is Huawei@CLOUD8. In template-based installation mode, the default password of user root is Huawei@CLOUD8!.
    2. Run the TMOUT=0 command to prevent PuTTY from exiting due to session timeout.

      After you run this command, the system continues to run when no operation is performed, resulting a risk. For security purposes, you are advised to run exit to exit the system after completing your operations.

    3. Run cd /opt/BCManager/Runtime/bin command to enter the script save path.

      In Linux, the installation path of the eReplication Server is /opt/BCManager. The path is fixed.

    4. Run the sh command.
    5. Type y and press Enter.


Linux is used as an example.

You are about to stop the DR system.
This operation will stop the DR system. DR protection is unavailable when the DR system is stopped.

Suggestion: After the configuration is complete, restart the DR system as soon as possible.

Are you sure you want to stop the DR system? (y/n):y

The service is shutting down. Please wait...

The DR system is shut down successfully.
Updated: 2019-05-21

Document ID: EDOC1100075861

Views: 14197

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next