No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor BCManager 6.5.0 eReplication User Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Sound Alarm Notification

Configuring Sound Alarm Notification

You can set different sounds for alarms of different severities. When eReplication receives an alarm, the built-in sound system of clients plays the preset sound to notify users of the alarm.


  • The alarm severity can be critical, major, minor, or warning. Sound types available for each alarm severity are Common and Loop.

    If the sound is set to Common, the system plays the alarm sound once every 20 seconds. If the sound is set to Loop, the system constantly plays the alarm sound for those alarms that are not cleared and acknowledged. You are advised to set the sound for critical alarms to Common. Otherwise, maintenance personnel may not hear the sound if they are away for a moment.

  • After an alarm is acknowledged, the alarm sound is not played any more.
  • You are advised not to disable the sound notification function for all severities of alarms, avoiding delayed handling of alarms.


  1. In the navigation tree, choose Monitor > Alarms > Sound Settings.
  2. Select alarm severities for which you want to enable alarm sound notification.

  3. Select a sound type. The sound type can be Common or Loop.


    Click to test the sound of the selected sound file.

  4. Click OK.

Follow-up Procedure

You can click the mute button in the upper right corner of eReplication to enable or disable the mute function.

Updated: 2019-05-21

Document ID: EDOC1100075861

Views: 14416

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next