No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor BCManager 6.5.0 eReplication User Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Internet Explorer

Configuring the Internet Explorer

When you access eReplication in different browsers using HTTPS, browsers may prompt a security certificate problem. This section explains how to install a security certificate.

Context

This section uses Internet Explorer 9.0 as an example.

Procedure

  1. Import the security certificate.
    1. In the address box of Internet Explorer on the maintenance terminal, enter https://IP:httpsport and press Enter.
    2. If you are prompted with There is a problem with this website's security certificate, select Continue to this website (not recommended).
    3. On the right of the address box, click Certificate Error. In the dialog box that is displayed, click View Certificates.
    4. In the Certificate dialog box, click Install Certificate.

      NOTE:
      • Verify that the IP address to which the certificate is issued is the same as the one used to log in to eReplication. If the certificate is not imported to the IP address, There is a problem with this website's security certificate is displayed when you import the certificate and log in to the eReplication again.
      • Verify that the client time is within the certificate validity period.


    5. Read instructions in Certificate Import Wizard, and click Next.
    6. Select Place all certificates in the following store and click Browse.

      NOTE:

      If you select Automatically select the certificate store based on the type of certificate, There is a problem with this website's security certificate is displayed on Windows 7.

    7. In the Select Certificate store dialog box, select Trusted Root Certification Authorities and click OK.
    8. In the Certificate Import Wizard dialog box that is displayed, perform operations as prompted. In the Security Warning dialog box, confirm the certificate source and click Yes to complete certificate import.

      NOTE:

      To enhance data security of eReplication, you are advised to replace the imported one with your customized security certificate.

  2. Disable the Warn about certificate address mismatch option.
    1. In Internet Explorer, choose Tools > Internet Options.
    2. In the Internet Options dialog box that is displayed, click Advanced.
    3. Deselect Warn about certificate address mismatch and click Apply.
  3. Enable the File downloads option.
    1. Click the Security tab.
    2. In the lower right corner of the page, click Custom level.

      The Security Settings-Internet Zone dialog box is displayed.

    3. In the Setting area, choose Download > File downloads and select Enable.

      Generally, this option is Enable by default.

    4. Click OK.

      The Warning dialog box is displayed.

    5. Click Yes.

      The Internet Options dialog box is displayed.

    6. Click Enable.
  4. Restart the browser to make the configuration take effect.
  5. Disable the browser's support for TLS 1.0 and earlier versions.

    TLS 1.0 and earlier versions have security vulnerabilities, which may result in device information leakage. Therefore, you are advised to disable the browser's support for TLS 1.0 and earlier versions before logging in to eReplication.

    1. Choose Tools > Internet Options from the browser menu (if the menu is not displayed, press the Alt key).
    2. In the Internet Options dialog box, click the Advanced tab.
    3. In the Security check box, deselect Enable TLS 1.0, Enable SSL 3.0 and Enable SSL 2.0, but select Enable TLS 1.1, and Enable TLS 1.2.

      eReplication can be accessed by TLS 1.1, and TLS 1.2, but cannot be accessed by other protocols such as TLS 1.0.

    4. Click OK.
Translation
Download
Updated: 2019-05-21

Document ID: EDOC1100075861

Views: 17901

Downloads: 76

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next