No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor BCManager 6.5.0 eReplication User Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installation Process

Installation Process

This section describes the process for installing eReplication. You can choose different installation modes and components as required.

Installation Process

Figure 2-1 shows the process for installing eReplication.
Figure 2-1  Installation process

Description of the Installation Process

Table 2-1 describes the installation process.
Table 2-1  Process description

Task

Description

Preparing for the installation

Make preparations before installing the eReplication DR management software to improve installation efficiency.

Installing eReplication Server

eReplication Server can be installed on VMs or physical servers, supports using a software package to install eReplication Server, and support template-based installation of FusionSphere OpenStack.
NOTE:
eReplication Server provides the following installation components:
  • Basic management components: providing various platform functions including system configuration, alarm monitoring, DR protection, recovery setting, and DR reports as well as the integrated environment for running DR service components.
  • FusionSphere DR management components: providing the DR protection function for FusionSphere.
  • Application DR management components: providing the DR protection function for applications including Oracle, IBM DB2, Microsoft SQL Server, and Microsoft Exchange Server as well as local file systems.
  • VMware vSphere DR management components: providing the DR protection function for VMware vSphere.

If you install eReplication Server using a software package, the basic management components are mandatory and the other three component categories are optional.

Installing eReplication Agent

If the protected objects are Oracle databases, IBM DB2 databases, Microsoft SQL Server databases, Microsoft Exchange Server mailbox databases, InterSystems Caché, and local NTFS, EXT3, EXT4 or XFS file systems, you need to install eReplication Agent on the DR host.

eReplication Agent can be installed on VMs or physical servers using a software package.

Installing VRG

When the protected objects are FusionSphere VMs and host-based replication-based DR is adopted, you need to install the host-based replication software Virtual Replication Gateway (VRG).

NOTE:

To ensure system security, you are advised to change the default password immediately after you install eReplication Server, eReplication Agent, and the VRG. For details about how to change the passwords, see eReplication Account Management.

Translation
Download
Updated: 2019-05-21

Document ID: EDOC1100075861

Views: 10639

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next