No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor BCManager 6.5.0 eReplication User Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a System Administrator Group

Creating a System Administrator Group

Administrator groups have different permissions sets. Administrators inherit permissions of their administrator groups that are specified during the administrator creation. By default, the system provides four administrator groups: administrator, operator, auditor, and NBIRole. If default administrator groups cannot meet permissions configuration requirements, the administrator that has the permissions of creating administrator groups can create administrator groups based on site conditions.


This table describes the permissions of administrator groups.

Table 3-3  Description of user permissions

User Role



Default administrator admin provided by the system. User admin has permissions for all operations and can manage all resources and users, and it cannot be deleted.


Admin Role users. Have permissions for all eReplication operations except for configuring the admin and Admin Role users.


Operator Role users. Such users have the following permissions:
  • View and refresh resources and all operation permissions of the sites
  • All operation permissions of the protected groups
  • All operation permissions of the recovery plan
  • All operation permissions of monitoring
  • View on-line administrators, view and configure the system performance, all operation permissions of data maintenance, view and export system operation logs, notify server all remote maintenance


Auditor Role users. Such users only have permissions to view operation logs dump, view and export system operation logs.


Users belonging to Third-Part System User Group. Such users only have permissions to view sites, protected group, view and execute recovery plan.


This role is used for the communication between two eReplication servers, and cannot be used by a third-party system or to log in to eReplication for system maintenance.


  1. On the menu bar, select Settings.
  2. In the navigation tree, choose System Administrator > Administrator Group.
  3. In the function pane, click Create.
  4. Configure basic information for the administrator group.

    1. Configure basic information for the administrator group. Table 3-4 describes related parameters.

      Table 3-4  Administrator group parameters





      Administrator group name.

      [Value range]

      The name contains 1 to 64 characters, including letters, digits, underscores (_), and hyphens (-), and can start only with a letter or underscore (_).




      Administrator group description.

      [Value range]

      Contains 0 to 100 characters.

    2. On the navigation bar, click Permission Set to select permissions.
  5. Click OK.
Updated: 2019-05-21

Document ID: EDOC1100075861

Views: 14806

Downloads: 71

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next