No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor BCManager 6.5.0 eReplication User Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing the Password of the HA Alarm Authentication

Changing the Password of the HA Alarm Authentication


After the system resets the password of user SyncAdmin, you need to synchronize the password of the HA alarm authentication.




Usage Guidelines

  1. Use PuTTY to log in to the eReplication Server management server.
    • In template-based installation mode: Log in as user DRManager, and run the su root command to switch to user root.
    • In software package-based installation mode: Log in as user root.
    The default password of user DRManager is Huawei@CLOUD8. In template-based installation mode, the default password of user root is Huawei@CLOUD8!.
  2. Run the following command to prevent PuTTY from exiting due to session timeout:



    After you run this command, the system continues to run when no operation is performed, resulting a risk. For security purposes, you are advised to run the exit command to exit the system after completing your operations.

  3. Run the following command to go to the save directory of the script.

    cd /opt/BCManager/Runtime/bin

  4. Run the following command to change the HA alarm authentication password.


    You need to run the sh command on both HA modes respectively.
  5. Enter y and press Enter.
  6. Enter the new password of user SyncAdmin and press Enter.


linux-h8g4:/opt/BCManager/Runtime/bin # sh 
Warning: Running this script will change the HA alarm authentication information. Ensure that the new authentication password is the same as user SyncAdmin's password of eReplication. 

Are you sure you want to continue (y/n): y
Please enter user SyncAdmin's new password:
Operation succeeded.
Updated: 2019-05-21

Document ID: EDOC1100075861

Views: 14645

Downloads: 70

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next