No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor BCManager 6.5.0 eReplication User Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding FusionSphere Components

Adding FusionSphere Components

If you want to add new FusionSphere VMs to a site for protection, you need to add necessary FusionSphere components, including FusionCompute, FusionManager, and VRGs.

Adding FusionManager

FusionManager monitors and manages cloud computing hardware and software. It provides automatic resource provisioning and automated infrastructure operation and maintenance (O&M). Additionally, it provides a web user interface (UI) for O&M administrators to operate and manage the resources in the system. If protected objects are FusionSphere VMs, eReplication provides data protection for them. Before creating protected groups, add FusionManager.

Prerequisites

  • A site has been created.
  • The FusionManager to be added has not been added to any site.
  • The FusionManager to be added is running properly.
  • The FusionManager to be discovered and storage devices are communicating properly with the eReplication on the same network plane.
  • The SOAP northbound interface of the FusionManager to be discovered has been opened. For details, see FusionSphere VMs (in Non-OpenStack Architecture).
  • The account and password provided by FusionManager to eReplication have been obtained. The default username and password of the account are CIDC-RP-05 and Huawei@CLOUD8!.

Context

  • When adding FusionManager, you must discover FusionCompute associated with FusionManager and FusionCompute must reside at the same site as FusionManager.
  • One piece of FusionManager can be added only to one site on eReplication.
  • In mote DR mode, a remote management server must be added and FusionManager must be added to the remote management server.

Procedure

  1. On the menu bar, select Resources.
  2. In the navigation tree, select the site where FusionManager is to be added.
  3. Choose Add FusionSphere Component > FusionManager.

    • In the Resource Statistics, choose Add FusionSphere Component > FusionManager.

    • In the navigation tree, select FusionSphere and choose Add FusionSphere Component > FusionManager.

  4. Optional: Select Apply the port, username, and password of the first row to the newly added row.. The system will copy the port number, user name, and password of the FusionManager in the first row to the FusionManager row to avoid repeated inputs.
  5. Set parameters for the FusionManager to be added as described in Table 5-142.



    Table 5-142  Parameters for adding FusionManager

    Parameter

    Description

    Value

    IP Address

    IPv4 or IPv6 address of FusionManager.

    [Example]

    192.168.10.11

    Port

    Communication port of FusionManager.

    [Value range]

    1 to 65535

    [Default value]

    8195

    Username

    Northbound interface account of FusionManager.

    It can be obtained from the FusionManager system administrator.

    Password

    Password of FusionManager's northbound interface account.

    It can be obtained from the FusionManager system administrator.

    NOTE:

    If added FusionManager does not need to be discovered, click Delete to delete it. The default information row cannot be deleted.

  6. Click OK.

Follow-up Procedure

After the FusionManager is added, you can refresh, modify, and delete FusionManager information. For details about subsequent operations, see Table 5-143.

Table 5-143  Related operations

Related Operation

Prerequisite and Result

In the row where the FusionManager resides, click More > Modify on the Operation list. In the Modify Device Information dialog box that is displayed, modify the name or authentication information of the FusionManager.

If authentication information of the FusionManager is modified, you need to synchronize the latest information to eReplication in time to ensure successful running of subsequent DR protection services.

In the row where the FusionManager resides, click More > Delete on the Operation list.

If one piece of FusionManager is no longer needed, you can delete it.

In the row where the FusionManager resides, click Refresh on the Operation list.

If FusionManager information is modified, you need to refresh the information on eReplication immediately.

Adding FusionCompute

FusionCompute is cloud operating system software, which virtualizes hardware resources and centrally manages virtual resources, service resources, and user resources. If protected objects are FusionSphere VMs, eReplication provides data protection for them. Before creating protected groups, add FusionCompute.

Prerequisites

  • A site has been created.
  • The FusionCompute to be added has not been added to any site.
  • The FusionCompute to be added is running properly.
  • The FusionCompute to be discovered and storage devices are communicating properly with the eReplication on the same network plane.
  • Before adding FusionCompute, an interconnection user has been created to connect FusionCompute to eReplication.

Context

  • When adding FusionManager, you must discover FusionCompute associated with FusionManager and FusionCompute must reside at the same site as FusionManager.
  • One piece of FusionCompute can be added only to one site on eReplication.
  • In mote DR mode, a remote management server must be added and FusionCompute must be added to the remote management server.
  • When adding FusionCompute, you need to discover the storage device associated with FusionCompute and must add them to the same site.

Procedure

  1. On the menu bar, select Resources.
  2. In the navigation tree, select the site where FusionCompute is to be added.
  3. Choose Add FusionSphere Component > FusionCompute.

    • In the Resource Statistics, choose Add FusionSphere Component > FusionCompute.

    • In the navigation tree, select FusionSphere and choose Add FusionSphere Component > FusionCompute.

  4. Optional: Select Apply the port, username, and password of the first row to the newly added row.. The system will copy the port number, user name, and password of the FusionCompute in the first row to the FusionCompute row to avoid repeated inputs.
  5. Set parameters for the FusionCompute to be added as described in Table 5-144.



    Table 5-144  Parameters for adding FusionCompute

    Parameter

    Description

    Value

    IP Address

    IPv4 or IPv6 address of FusionCompute.

    [Example]

    192.168.10.11

    Port

    Communication port of FusionCompute.

    [Value range]

    1 to 65535

    [Default value]

    7443

    Username

    Username of the interconnection user of FusionCompute and eReplication.

    It can be obtained from the FusionCompute system administrator.

    Password

    Password of the interconnection user of FusionCompute and eReplication.

    It can be obtained from the FusionCompute system administrator.

    NOTE:

    If added FusionCompute does not need to be discovered, click Delete to delete it. The default information row cannot be deleted.

  6. Click OK.

Follow-up Procedure

After the FusionCompute is added, you can refresh, modify, and delete FusionCompute information. For details about subsequent operations, see Table 5-145.

Table 5-145  Related operations

Operation

Prerequisite and Result

In the row where the FusionCompute resides, click More > Modify on the Operation list. In the Modify Device Information dialog box that is displayed, modify the name or authentication information of the FusionCompute.

If authentication information of the FusionCompute is modified, you need to synchronize the latest information to eReplication in time to ensure successful running of subsequent DR protection services.

In the row where the FusionCompute resides, click More > Delete on the Operation list.

If one piece of FusionCompute is no longer needed, you can delete it.

In the row where the FusionCompute resides, click Refresh on the Operation list.

If FusionCompute information is modified, you need to refresh the information in eReplication immediately.

Create a Resource Mapping

When the protected objects are FusionSphere VMs, map virtualization resources from the protected site to the DR site so that the VM can be recovered at the DR site based on the target attributes specified during resource mapping.

Prerequisites

  • A site has been created.
  • Resources, applicable to resource various DR technologies and FusionSphere components, are available for mapping creation.

Context

Resource mappings vary with DR technologies and FusionSphere components, as shown in Table 5-146.

Table 5-146  Description of resource mappings for different DR technologies

DR Technology

FusionSphere Component

Description

Host replication

FusionCompute

Create resource mappings for clusters or hosts, port groups, datastores, and VRGs.

FusionManager

Create resource mappings for clusters, networks, security groups, and VRGs. Resource mappings for security groups are optional. If the VMs that require DR have been added into a security group, you must create resource mappings for the security group.

Non-host-based replication

FusionCompute

Create resource mappings for port groups, and clusters or hosts.

FusionManager

Create resource mappings for clusters, networks, security groups, and VRGs. Resource mappings for security groups are optional. If the VMs that require DR have been added into a security group, you must create resource mappings for the security group.

A resource at the production or DR site can be mapped only to one resource of the same type.

Procedure

  1. On the menu bar, select Resources.
  2. In the navigation tree, select the site where resource mappings are to be created, and click FusionSphere.
  3. Select the FusionCompute and FusionManager VMs that need to be mapped to resources.
  4. Select the type of the resource mappings and click Add.

    The wizard for creating resource mappings is displayed.

  5. Select FusionCompute and FusionManager corresponding to the production and DR sites respectively.

    If FusionManager is selected, select the production VPC and DR VPC.

  6. Click Next.

    The page for configuring mapping views is displayed.

  7. Select the resource object to be mapped, and select resources from the production and DR sites respectively.
  8. Select a resource and click Add.

    In Mapping area, the mapping is displayed.

    You can go to add other resources and batch create resource mappings for VMs.

    NOTE:

    If you want to perform Test from the production site to same-city DR site or remote DR site, add the mapping between the production site and same-city DR site or between the production site and remote DR site to the Cluster Mapping area.

  9. Click OK.
  10. Perform 5 to 9 repeatedly, select FusionCompute related to FusionCompute, and select other resources to create resource mappings for VMs.
  11. Perform 3 to 10 repeatedly to create resource mappings one by one.
Translation
Download
Updated: 2019-05-21

Document ID: EDOC1100075861

Views: 13884

Downloads: 68

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next