No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor BCManager 6.5.0 eReplication User Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Log In To eReplication

Log In To eReplication

This section describes how to log in to eReplication.


  • eReplication supports the following browsers:
    • Internet Explorer 9.0 to Internet Explorer 11.0
    • Firefox 49.0 to Firefox 57.0
    • Google Chrome 53.0 to Google Chrome 62.0
  • eReplication supports Adobe Flash Player 10.2 or a later version.
  • A certificate and security protocol have been configured for Internet Explorer, Firefox, or Chrome. For details about the operations, see Configuring the Internet Explorer, Configuring the Firefox Browser, and Configuring the Chrome Browser.
  • The management IP address of eReplication has been obtained.
  • The username and password for logging in to eReplication have been obtained.

    The default username is admin and default password is Admin@123.

  • eReplication supports the resolution of 1280 x 768 or higher. You can adjust the resolution based on site requirements.


  1. Open an Internet Explorer browser.

    The following operations use Internet Explorer 9.0 as an example.

  2. In the address box of Internet Explorer, type https://management IP address or floating IP address of the VM or physical server that is installed on eReplication:9443 and press Enter.

    For example, in the address box of the browser, enter

    • If eReplication is configured with HA mode, use floating IP address:9443 for login.
    • If the security certificate is not installed, a security warning dialog box is displayed. In the dialog box that is displayed, click Continue to this website (not recommended).

  3. Select a language and enter the username and password.

    The default username is admin and default password is Admin@123.

  4. Click Log In or Enter.

    Log in to eReplication. Change the password as prompted upon the first login. Then use the new password to log in to eReplication.

    • If you enter an incorrect username or password, enter the username, password, and authentication code again.
    • If the browser is not installed with the Flash Player plug-in, the system will display the prompt information. Click Flash Player in the prompt information box to download and install the flash player. If you do not perform this operation, eReplication cannot display some pages normally.


  • Upon your first login to eReplication, multimedia about DR configuration process and service configuration of eReplication is displayed on the Home page, facilitating users to configure DR services.

  • Select Do not show this next time, and log in to eReplication again. The multimedia will not be displayed. If you want to view the configuration multimedia, click the drop-down arrow next to the quotation mark (?) in the upper right corner. In the shortcut menu that is displayed, choose Quick Start.

Related operations

Updated: 2019-05-21

Document ID: EDOC1100075861

Views: 13970

Downloads: 68

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next