No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

TR-069 Configuration Parameter Description

HUAWEI IP Phone 7920 and 7960 V600R019C10

Describes the TR-069 configuration parameters.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Supported TR-069 Remote Procedure Call (RPC) Methods

Supported TR-069 Remote Procedure Call (RPC) Methods

Table A-1 Supported TR-069 Remote Procedure Call (RPC) Methods

No.

RPC Method

Application Scenario

1

GetRPCMethods

Used for the ACS to obtain the CPE-supported TR-069 methods from the CPE.

2

SetParameterValues

Used for the ACS to set parameters for the CPE.

3

GetParameterValues

Used for the ACS to read parameters from the CPE.

4

GetParameterNames

Used for the ACS to obtain the CPE-supported parameter names from the CPE.

5

Reboot

Used for the ACS to remotely restart the CPE.

6

Download

Used for the ACS to instruct the CPE to download files and configurations.

7

Upload

Used for the ACS to instruct the CPE to upload logs.

8

FactoryReset

Used for the ACS to remotely restore the CPE to factory defaults.

Translation
Download
Updated: 2019-06-10

Document ID: EDOC1100076385

Views: 6941

Downloads: 5

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next