No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Event Reference for File

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF00170014 Power Module Has No Input

0xF00170014 Power Module Has No Input

Description

There is no power input to a power module.

Applicable Model

Applicable to all models.

Attribute

ID

Event Type

Event Level

Automatically Cleared

0xF00170014

Alarm

Major

Yes

Impact on the System

The storage system fails to start.

Possible Causes

  • Power cables are removed or damaged.
  • No external power is input.
  • The power module is faulty.

Procedure

  1. Check whether power cables are connected correctly.

    1. If yes=> Step2.
    2. If no, connect the power cables correctly. If the alarm persists=> Step2.

  2. Check power cables.

    1. If any power cable is removed, reinsert it. If the alarm persists=> 2.2.
    2. Replace the power cable. If the alarm persists=> Step3.

  3. Check whether the power module is inserted.

    1. If yes=> Step4.
    2. If no, reinsert the power module. If the alarm persists=> Step4.

  4. Check whether any external power is input to the power module.

    1. If yes=> Step5.
    2. If no, supply power to the storage system correctly. If the alarm persists=> Step5.

  5. Replace the power module. If the alarm persists=> Step6.
  6. Collect related information and contact technical support engineers.
Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100076630

Views: 16129

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next