No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Event Reference for File

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0x200F406E0013 An NDMP Backup Task Fails

0x200F406E0013 An NDMP Backup Task Fails

Description

An NDMP backup task fails.

Applicable Model

Applicable to all models.

Attribute

ID

Event Type

Event Level

Automatically Cleared

0x200F406E0013

Alarm

Major

No

Impact on the System

N/A.

Possible Causes

  • The protected directory cannot be backed up directly.
  • The file system snapshot fails to be created.
  • The file system snapshot fails to be deleted.
  • The number of tasks reaches the upper limit.
  • NetBackup actively stops the backup task, the file system fails to be accessed, or the tape library fails to be accessed.

Procedure

  1. Check the network connection.

    1. Check whether the network connection is correct.
    2. Reconnect the cables. Then check whether the alarm is cleared.If yes, no further action is required.

  2. Check the tape library.

    1. Ensure that the tape drive is in the up state. Then check whether the alarm is cleared.If yes, no further action is required.
    2. Ensure the tape library is functional. Then check whether the alarm is cleared.If yes, no further action is required.

  3. Collect all related information and contact technical support engineers.
Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100076630

Views: 19544

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next