No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Event Reference for File

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF00280075 File System Under Write Protection

0xF00280075 File System Under Write Protection

Description

A file system is under write protection.

Applicable Model

Applicable to all models.

Attribute

ID

Event Type

Event Level

Automatically Cleared

0xF00280075

Alarm

Critical

Yes

Impact on the System

The file system is read-only.

Possible Causes

  • The disk domain is faulty.
  • The service load is heavy.

Procedure

  1. Check whether an alarm is generated indicating that the disk domain is faulty.

    1. If yes, rectify the fault. If the alarm persists=> Step3.
    2. If no=> Step2.

  2. Check whether the service load is too heavy

    1. If yes, reduce the service load and ensure that the self-healing function is enabled (in the developer view, run the "show fdsa switch" command to check whether the self-healing function is enabled. If no, run the "change fdsa switch switch=yes" command to enable the function.) If the alarm persists after one minute=> Step3.
    2. If no=> Step3.

  3. Collect all related information and contact technical support engineers.
Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100076630

Views: 16464

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next