No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Event Reference for File

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF00CA0019 The Call Home Service Fails To Connect The Technical Support Center

0xF00CA0019 The Call Home Service Fails To Connect The Technical Support Center

Description

The call home service fails to connect the technical support center.

Applicable Model

Applicable to all models.

Attribute

ID

Event Type

Event Level

Automatically Cleared

0xF00CA0019

Alarm

Warning

No

Impact on the System

The array cannot upload Call Home data.

Possible Causes

  • The Call Home certificate is invalid or does not exist.
  • The proxy server is incorrectly configured.
  • The DNS service is not configured.
  • The Call Home service authentication has become invalid.

Procedure

  1. In Credential Management, check whether the certificate of the Call Home service does not exist or expires.

    1. If yes=> Step5.
    2. If no=> Step2.

  2. Check whether the proxy server is correctly configured.

    1. If no, reconfigure the proxy server.
    2. If yes=> Step3.

  3. Check whether the DNS service is configured.

    1. If no, configure the DNS service.
    2. If yes=> Step4.

  4. Re-authenticate the Call Home service.
  5. Collect related information and contact technical support engineers.
Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100076630

Views: 15840

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next